Huamo TF8040-SW Seawater Anti-Fouling RO Membrane
The TF8040-SW is a fouling-resistant reverse osmosis membrane element developed by Huamo for seawater and high-salinity applications. Achieving a salt rejection rate of up to 99.8%, this 8-inch membrane is designed for desalination of brackish water, surface water, and seawater with feed salinity under 5000 mg/L.
- Low energy consumption
- High filtration accuracy
- Large water output
- Strong anti-fouling
Product Introduction
The TF8040-SW is an 8-inch seawater anti-fouling reverse osmosis membrane element developed by Huamo Environmental for high-salinity desalination applications. Achieving a stable salt rejection rate of up to 99.8% with a minimum rejection of 99.65% and a boron rejection rate of 92%, it delivers superior desalination performance for seawater and high-salinity brackish water treatment. The anti-fouling design reduces maintenance requirements in challenging marine environments. It is widely applied in seawater desalination plants, island and coastal water supply systems, offshore platforms, and industrial applications requiring high-purity water from saline sources.
Specifications & Parameters
Performance Parameters:
| Model | Effective Area ft² (m²) | Stable Boron Rejection % | Stable Salt Rejection % | Minimum Salt Rejection % | Permeate Flow gpd (m³/d) | Stable Salt Rejection % |
| TF8040-SW | 400 (37) | 92 | 99.8 | 99.65 | 7,500 (28) |
Note: Test conditions: 32,000 ppm NaCl solution, 800 psi (5.5 MPa), 25°C, pH 8, 8% recovery rate.
Effective membrane area tolerance: ±3%; individual element permeate flow variation: ±15%.
Product Dimensions:
| Model | A inch (mm) | B inch (mm) | C inch (mm) | D inch (mm) |
| TF8040-SW | 40 (1,016) | 1.125 (29) | 7.9 (201) |
Note: 1 inch = 25.4 mm
Operating Conditions
| Membrane Type | Polyamide Composite Membrane |
| Maximum Operating Pressure | 1,200 psi (8.3 MPa) |
| Maximum Operating Temperature | 45°C |
| Feed Water pH Range | 3.0 - 10.0 (continuous operation) |
| Maximum Feed Water Chlorine | <0.1 ppm |
Application Areas
The TF8040-SW membrane is widely applied in seawater desalination plants, island and coastal water supply, offshore platforms, maritime applications, and industrial high-salinity water treatment. It delivers superior salt rejection up to 99.8%, 92% boron rejection, anti-fouling design, and reliable performance in high-salinity environments to meet diverse water treatment requirements.
Links